?
Multi Tower Pillar

Multi Tower Pillar

MultiTower Pillar allows you to cover columns all around. It therefore creates an impressive advertising area which gets even more impressive when it is LED backlit.


- +

Multi Tower Pillar

The Multi Tower Pillar allows for full column cladding and creates an impressive advertising surface that becomes even more striking with LED backlighting. When used with lighting, a 6.5 cm distance between the column and the cladding must be maintained to ensure even illumination.

profile design – outside corner

The advantage compared to similar products is the 90° profile slot. The fabric is pushed 3 mm into the slot and only then tensioned around the corner. This technique helps to preserve the fabric as it prevents it from overstretching.

 

straight connector – transport

Multi tower 3D profiles can be used in lengths up to 6 m / 18 ft. or can be cut to smaller sizes for transport and connected with straight connectors. A two meter / 78.8” profile can be cut in two pieces. This makes transporting much easier. For transport we use hard-sided cases.

 

 

RAL colours

Different colours are possible upon request (powder coating).

Application

Print

Two high-quality printing methods are available – depending on requirements and application:

UV Printing
With UV printing, liquid UV ink is applied directly to the textile and instantly cured with UV light. The color stays on the surface of the fabric, delivering precise, opaque, and high-contrast results.

- Intense, full coverage colors

- Highest level of detail

- Sharp, high-contrast motifs

- Super Black - an especially deep and intense black

Note: Always store UV-printed fabrics rolled up – folding can cause color cracking.




Sublimation Printing
With sublimation printing, the ink is vaporized by heat directly into the fibers of the fabric – becoming a permanent part of the material.

- Vibrant, brilliant colors with high color depth

- Permanently fixed

- Stable even after many washes

- No noticeable layer on the fabric

- Suitable for gradients and detailed motifs

- Fabrics can be folded - space-saving storage

Contact

Imprint

Display-Schmiede e.K.

Inhaber: Florian Kaiser

Ringstraße 9
D-86857 Hurlach

Tel.: +49 (0)8191 / 9635 477

E-Mail: info[a]display-schmiede.de
Internet: www.display-schmiede.de

Registereintrag:
Registergericht: Amtsgericht Augsburg
Registernummer: HRA 18440

Umsatzsteueridentifikationsnummer nach §27a Umsatzsteuergesetz:
USt-IdNr: DE294987316

Steuernummer: 131/234/20076

verantwortlich für den Inhalt (gem. §55 Abs. 2 RStV):
Florian Kaiser
[Adresse siehe oben]

Haftungsausschluss:
Kostenlose und frei zugängliche Inhalte dieser Website wurden mit größtmöglicher Sorgfalt erstellt. Der Anbieter dieser Website übernimmt jedoch keine Gewähr für die Richtigkeit und Aktualität.


Die Haftung für den Inhalt der Internetseiten, welche durch externe Links über diese Homepage erreicht werden können, ist ausgeschlossen. Diese Websites unterliegen der Haftung der jeweiligen Betreiber. Bei erstmaliger Verknüpfung dieser externen Links wurden die fremden Inhalte auf bestehende Rechtsverstöße überprüft. Zu diesem Zeitpunkt waren keine Rechtsverstöße ersichtlich. Es besteht kein Einfluss auf die aktuelle und zukünftige Gestaltung auf die Inhalte der verknüpften Seiten. Eine ständige Kontrolle der externen Links ist nicht zumutbar. Bei Kenntnissen zu Rechtsverstößen werden diese Links umgehend gelöscht.